[trikes] Earth Cycles

[Colin Bryant]

Thanks for that bit of history.

 -- 
Colin Bryant
Vancouver, Canada




________________________________
From: Tom Sherman <twsherman at southslope.net>
To: Trikes List <trikes at bikelist.org>
Sent: Tue, October 5, 2010 5:42:50 AM
Subject: Re: [trikes] Earth Cycles

On 10/5/2010 6:12 AM, Tom Sherman wrote:
>  For those who remember Earth Cycles from the mid 1990's to ca 2002, the 
>remaining physical assets have been sold.
> 
> For those curious as to what the welding jig for a trike looks like, here is a 
>photo [1]: 
><http://xa.yimg.com/kq/groups/3434914/hr/859418448/name/DF+Welding+Jig.jpg> or 
><http://groups.yahoo.com/group/ecog/photos/album/1658930801/pic/859418448/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc>.
>
> 
> Here is what I believe was the prototype for the Dragonflyer: 
><http://groups.yahoo.com/group/ecog/photos/album/1220201701/pic/list>.
> 
> [1] Unfortunately shot in poor lighting inside my garage at night.
> 
> Tom Sherman - Garage full of Earth Cycles stuff
> -- This message comes to you via the trikes at bikelist.org mailing list, 
>sponsored by http://www.HuPI.org/
> Visit http://bikelist.org/mailman/listinfo/trikes to manage your subscription.
> 

All pictures are also here: 
<http://www.flickr.com/photos/19704682@N08/sets/72157624975587877/>.
--
This message comes to you via the trikes at bikelist.org mailing list, sponsored by 
http://www.HuPI.org/
Visit http://bikelist.org/mailman/listinfo/trikes to manage your subscription.