[hpv-forsale] 571 mm rear wheel, $50

[Zach Kaplan]

I have a 571 mm (AKA 650c) rear wheel built with a Sun ME14 Ultra  
Hard Anno rim, Shimano 600 FH-6402 hub and 28 DT 2.0 mm stainless  
steel spokes laced 3-cross I'll sell for $50 plus postage. The rim  
has very little sidewall wear. Note this older model Ultegra level  
hub takes an 8/9/10-speed cassette but doesn't have the groove at the  
end of the cassette body for taking an 11-tooth cog. However you can  
run an 11-tooth cog on this hub by putting a 1 mm spacer between the  
largest cog and the end of the cassette body.

-------------------------------------------------------------
Zach Kaplan Cycles
Alameda, Northern California, North America
510-522-BENT (2368)
zakaplan at earthlink.net